- 6 -
2 Addditional safety instructions for
Miter Saws
a) Wear eye protection.
Projectiles thrown away from the machine
could cause serious permanent eye dam-
age. Always wear safety goggles, not
glasses, complying with ANSI Z87.1 (or in
Canada CSA Z94-3-M88). Everyday eye-
glasses have only impact resistant lenses.
They are not safety glasses! Safety gog-
gles are available at many local retail
stores. Glasses or goggles not in compli-
ance with ANSI or CSA could seriously
hurt you when they break.
b) Keep hands out of path of saw blade.
Avoid contact with any coasting blade. It
can still cause severe injury.
c) Do not operate saw without guards in
place.
Check blade guard for proper closing
before each use. Do not operate saw if
blade guard does not move freely and
close instantly. Never clamp or tie the
blade guard into the open position.
d) Do not perform any operation freehand.
The workpiece must be secured firmly
against the turn base and guide fence with
a vise during all operations. Never use
your hand to secure the workpiece.
Always use vise!
e) Never reach around saw blade and
keep fingers in a safe distance.
f) Turn off tool and wait for saw blade to
stop before moving workpiece or
changing settings.
g) Disconnect power (or unplug tool as
applicable) before changing blade or
servicing.
Unplug your scroll saw before changing
blades, adjustments, or performing any
maintenance.
h) Always remain alert when in the saw is
in use. Inattention on the part of the oper-
ator may lead to serious injury.
i) Before starting your work always
inspect your workpiece
Make sure there are no nails or foreign
objects in the part of the work piece to be
cut.
j) Check damaged parts and watch the
saw while it runs
Before use of the tool, any part that is
damaged should be carefully checked to
ensure that it will operate properly and
perform its intended function. If the saw
makes an unfamiliar noise or vibrates
excessively, stop immediately; turn the
saw off. Unplug the saw! Check for align-
ment of moving parts, mounting, and any
other conditions that may affect its opera-
tion. If any part is missing, broken or bent
in any way, or any electrical parts don’t
work properly, turn the saw off and unplug
the saw. Do not restart until finding and
fixing the problem correctly. All repairs,
electrical or mechanical, should be
attempted only by trained repairmen.
k) Do not operate machine while under the
influence of drugs, alcohol or medica-
mentation
Never operate a machine when tired, or
under the influence of drugs or alcohol or
medicamentation. Full mental alertness is
required at all times when running a
machine.
i) Do not remove jammed cutoff pieces
until saw blade has stopped completely.
Before freeing any jammed material or
loose pieces from the turn-table of the
saw, turn the machine off, wait for all mov-
ing parts to stop and unplug the saw!
3 Grounding instructions
In the event of a malfunction or breakdown,
grounding provides a path of least resistance
for electric current to reduce the risk of electric
shock. This tool is equipped with an electric
cord having an equipment-grounding conduc-
tor and a grounding plug. The plug must be
plugged into a matching outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
Do not modify the plug provided – if it will not
fit the outlet, have the proper outlet installed
by a qualified electrician.
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. The conductor with insulation
having an outer surface that is green with or
without yellow stripes is the equipment-
grounding conductor. If repair or replacement
(8 Seiten)
(38 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern