Proxxon 38530 Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 9)

Accessories (included):

1 pc. Rip fence

4 pc. Supercut saw blades for wood, plastic and metal.

1 pc. Hex wrench (for changing saw blade)

1 pc. Hex wrench (for plate adjustment)

1 pc. Instruction Manual

Operation

Selecting the saw blades:

Depending on the material to be cut, you can choose between two different types of

saw blades PROXXON provides. The correct selection of material has a very great

influence on the quality of the result. You can find the description of the appropriate

saw blades in the accessories-section.

Clamping and changing saw blades

Danger!

Injury hazard! Always remove the mains plug before performing the activities described

here.

1. Loosen clamp screw using the hex wrench (1) provided (Fig. 2).

2. Insert saw blade (2) into slot in the saw blade mount and re-tighten clamp screw.

Important

The saw blade must be located in the groove of the support roller.

Setting the miter angle

Danger!

Injury hazard! Disconnect the mains plug before proceeding.

1. Loosen clamp screw using the hex wrench 1 (Fig. 3).

2. Adjust the saw plate (2) to the desired miter angle and re-tighten the clamp screw.

Setting the rip fence

Danger!

Injury hazard! Disconnect the main plug before removing or installing accessories..

1. Loosen clamp screw 1 (Fig. 4) using the hex wrench provided

2. Adjust the rip fence (2) to the desired dimension and re-tighten the clamp screw.

- 9 -

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Proxxon 38530 Gebrauchs- und Pflegehandbuch Seite 9